File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Calibration of a micromanipulation system

TitleCalibration of a micromanipulation system
Authors
Issue Date2002
Citation
IEEE International Conference on Intelligent Robots and Systems, 2002, v. 2, p. 1742-1747 How to Cite?
AbstractCalibration is indispensable for automatic micromanipulation. In this paper, using the height difference between different focus planes detected from the microscope and the coordinates of the probe measured from encoders, systematic methods to calibrate the relative position and orientation between the tools and the microscope are developed. Using the Least Square Error (LSE) method to process the data measured, the influence of various positioning errors can be reduced. Experiments are performed to calibrate a micromanipulation system using the proposed methods. The calibration results are validated by cross verification through further experiments.
Persistent Identifierhttp://hdl.handle.net/10722/212756

 

DC FieldValueLanguage
dc.contributor.authorLi, Guangyong-
dc.contributor.authorXi, Ning-
dc.date.accessioned2015-07-28T04:04:55Z-
dc.date.available2015-07-28T04:04:55Z-
dc.date.issued2002-
dc.identifier.citationIEEE International Conference on Intelligent Robots and Systems, 2002, v. 2, p. 1742-1747-
dc.identifier.urihttp://hdl.handle.net/10722/212756-
dc.description.abstractCalibration is indispensable for automatic micromanipulation. In this paper, using the height difference between different focus planes detected from the microscope and the coordinates of the probe measured from encoders, systematic methods to calibrate the relative position and orientation between the tools and the microscope are developed. Using the Least Square Error (LSE) method to process the data measured, the influence of various positioning errors can be reduced. Experiments are performed to calibrate a micromanipulation system using the proposed methods. The calibration results are validated by cross verification through further experiments.-
dc.languageeng-
dc.relation.ispartofIEEE International Conference on Intelligent Robots and Systems-
dc.titleCalibration of a micromanipulation system-
dc.typeConference_Paper-
dc.description.natureLink_to_subscribed_fulltext-
dc.identifier.scopuseid_2-s2.0-0036453904-
dc.identifier.volume2-
dc.identifier.spage1742-
dc.identifier.epage1747-

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats