File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: Rolling and recrystallization texture of cold rolled if steel: A study from low to high deformation

TitleRolling and recrystallization texture of cold rolled if steel: A study from low to high deformation
Authors
KeywordsCold Rolling
Deformation Band
If Steel
Recrystallization
Shear Band
Issue Date2004
PublisherTrans Tech Publications Ltd. The Journal's web site is located at http://www.scientific.net
Citation
Materials Science Forum, 2004, v. 467-470 I, p. 311-316 How to Cite?
AbstractIF steel was homogeneously cold rolled between 30-95% reduction in thickness. The global cold rolling textures showed a gradual strengthening of both stable α and γ components with increasing reduction until ∼80% after which γ remained effectively unchanged but α components intensified until 95% reduction of thickness. Deformation Banded (DB) and also fragmented microstructures were found exclusively in y grains up until about 85% reduction after which DB was unexpectedly detected in a grains, becoming significant after 95% reduction. This is in sharp contrast with the rather undifferentiated microstructures found in a grains at low to medium levels of deformation. At lower reductions the annealing texture was a weak α, but the γ component increased with rolling strain and became dominant at ∼80% rolling deformation. A peak type γ recrystallisation texture with orientations ranging from {554}<225> to {111}<123> was found in the 95% rolled sample. In addition to this a {411 }<148> component began to intensify, reading 5R at 95% reduction. Microstructural analysis showed that DB provided the lattice curvature for nucleation in the α fibre. © 2004 Trans Tech Publications, Switzerland.
Persistent Identifierhttp://hdl.handle.net/10722/174090
ISSN
2005 Impact Factor: 0.399
References

 

DC FieldValueLanguage
dc.contributor.authorQuadir, MZen_US
dc.contributor.authorTse, YYen_US
dc.contributor.authorLam, KTen_US
dc.contributor.authorDuggan, BJen_US
dc.date.accessioned2012-11-14T06:20:49Z-
dc.date.available2012-11-14T06:20:49Z-
dc.date.issued2004en_US
dc.identifier.citationMaterials Science Forum, 2004, v. 467-470 I, p. 311-316en_US
dc.identifier.issn0255-5476en_US
dc.identifier.urihttp://hdl.handle.net/10722/174090-
dc.description.abstractIF steel was homogeneously cold rolled between 30-95% reduction in thickness. The global cold rolling textures showed a gradual strengthening of both stable α and γ components with increasing reduction until ∼80% after which γ remained effectively unchanged but α components intensified until 95% reduction of thickness. Deformation Banded (DB) and also fragmented microstructures were found exclusively in y grains up until about 85% reduction after which DB was unexpectedly detected in a grains, becoming significant after 95% reduction. This is in sharp contrast with the rather undifferentiated microstructures found in a grains at low to medium levels of deformation. At lower reductions the annealing texture was a weak α, but the γ component increased with rolling strain and became dominant at ∼80% rolling deformation. A peak type γ recrystallisation texture with orientations ranging from {554}<225> to {111}<123> was found in the 95% rolled sample. In addition to this a {411 }<148> component began to intensify, reading 5R at 95% reduction. Microstructural analysis showed that DB provided the lattice curvature for nucleation in the α fibre. © 2004 Trans Tech Publications, Switzerland.en_US
dc.languageengen_US
dc.publisherTrans Tech Publications Ltd. The Journal's web site is located at http://www.scientific.neten_US
dc.relation.ispartofMaterials Science Forumen_US
dc.subjectCold Rollingen_US
dc.subjectDeformation Banden_US
dc.subjectIf Steelen_US
dc.subjectRecrystallizationen_US
dc.subjectShear Banden_US
dc.titleRolling and recrystallization texture of cold rolled if steel: A study from low to high deformationen_US
dc.typeConference_Paperen_US
dc.identifier.emailDuggan, BJ: bjduggan@hkucc.hku.hken_US
dc.identifier.authorityDuggan, BJ=rp01686en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.scopuseid_2-s2.0-17044439145en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-17044439145&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume467-470en_US
dc.identifier.issueIen_US
dc.identifier.spage311en_US
dc.identifier.epage316en_US
dc.publisher.placeSwitzerlanden_US
dc.identifier.scopusauthoridQuadir, MZ=6603710687en_US
dc.identifier.scopusauthoridTse, YY=7005116855en_US
dc.identifier.scopusauthoridLam, KT=55106365700en_US
dc.identifier.scopusauthoridDuggan, BJ=7005772998en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats