File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Conference Paper: The influence on the properties of microporous mullite of adding different burning-out materials

TitleThe influence on the properties of microporous mullite of adding different burning-out materials
Authors
KeywordsLightweight
Mircoporous
Mullite
Refractories
Issue Date2011
PublisherTrans Tech Publications Ltd.. The Journal's web site is located at http://www.scitec.ch/1022-6680/
Citation
Advanced Materials Research, 2011, v. 214, p. 84-88 How to Cite?
AbstractMullite has low thermal conductivity, advanced volume stability at high temperature, and is suit to prepare lightweight refractories. The micropored mullite aggregates has been produced by using industrial alumina and natural silica as starting materials, adding some burning-out materials, then fired at 1350°C for 6h. The influences on the bulk density, pore size distribution and microstructure of microporous mullite of adding these burning-out materials, such as carbon black, coke, and anthracite have been investigated. The conclusions are that the influences on the bulk density and microstructure of micropored mullite aggregates are significant. These three burning-out materials have a similar effect for the pore size distribution. The microporous mullite aggregates has the smallest bulk density and more uniform microstructure by using anthracite as the burning-out material. © (2011) Trans Tech Publications.
Persistent Identifierhttp://hdl.handle.net/10722/168869
ISSN
2015 SCImago Journal Rankings: 0.115
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorBi, YBen_US
dc.contributor.authorWang, HFen_US
dc.contributor.authorLu, Wen_US
dc.date.accessioned2012-10-08T03:35:15Z-
dc.date.available2012-10-08T03:35:15Z-
dc.date.issued2011en_US
dc.identifier.citationAdvanced Materials Research, 2011, v. 214, p. 84-88en_US
dc.identifier.issn1022-6680en_US
dc.identifier.urihttp://hdl.handle.net/10722/168869-
dc.description.abstractMullite has low thermal conductivity, advanced volume stability at high temperature, and is suit to prepare lightweight refractories. The micropored mullite aggregates has been produced by using industrial alumina and natural silica as starting materials, adding some burning-out materials, then fired at 1350°C for 6h. The influences on the bulk density, pore size distribution and microstructure of microporous mullite of adding these burning-out materials, such as carbon black, coke, and anthracite have been investigated. The conclusions are that the influences on the bulk density and microstructure of micropored mullite aggregates are significant. These three burning-out materials have a similar effect for the pore size distribution. The microporous mullite aggregates has the smallest bulk density and more uniform microstructure by using anthracite as the burning-out material. © (2011) Trans Tech Publications.en_US
dc.languageengen_US
dc.publisherTrans Tech Publications Ltd.. The Journal's web site is located at http://www.scitec.ch/1022-6680/en_US
dc.relation.ispartofAdvanced Materials Researchen_US
dc.subjectLightweighten_US
dc.subjectMircoporousen_US
dc.subjectMulliteen_US
dc.subjectRefractoriesen_US
dc.titleThe influence on the properties of microporous mullite of adding different burning-out materialsen_US
dc.typeConference_Paperen_US
dc.identifier.emailLu, W:luwei@hku.hken_US
dc.identifier.authorityLu, W=rp00754en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.4028/www.scientific.net/AMR.214.84en_US
dc.identifier.scopuseid_2-s2.0-79952385815en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-79952385815&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume214en_US
dc.identifier.spage84en_US
dc.identifier.epage88en_US
dc.identifier.isiWOS:000292890500017-
dc.publisher.placeSwitzerlanden_US
dc.identifier.scopusauthoridBi, YB=37013041500en_US
dc.identifier.scopusauthoridWang, HF=37014249300en_US
dc.identifier.scopusauthoridLu, W=27868087600en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats