File Download

There are no files associated with this item.

  Links for fulltext
     (May Require Subscription)
Supplementary

Article: Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys

TitleEffect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys
Authors
Issue Date2004
PublisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dental
Citation
Dental Materials, 2004, v. 20 n. 6, p. 586-590 How to Cite?
AbstractThe influence of various drying time of a commercial silanes on the shear bond strength of a composite resin to silica-coated base and noble alloys was discussed. The drying time of MPS silane on tribochemically silica coated base and noble alloys did not show a significant difference in the bond strength of resin composite. The flow of work was optimized by reducing the drying time of MPS silane to 1 min for both base and noble alloys. It was observed that the bond strengths of resin composite to base alloys were higher than the bond strength of noble alloys at 2,3 and 5 min.
Persistent Identifierhttp://hdl.handle.net/10722/154352
ISSN
2015 Impact Factor: 3.931
2015 SCImago Journal Rankings: 1.339
ISI Accession Number ID
References

 

DC FieldValueLanguage
dc.contributor.authorÖzcan, Men_US
dc.contributor.authorMatinlinna, JPen_US
dc.contributor.authorVallittu, PKen_US
dc.contributor.authorHuysmans, MCen_US
dc.date.accessioned2012-08-08T08:24:50Z-
dc.date.available2012-08-08T08:24:50Z-
dc.date.issued2004en_US
dc.identifier.citationDental Materials, 2004, v. 20 n. 6, p. 586-590en_US
dc.identifier.issn0109-5641en_US
dc.identifier.urihttp://hdl.handle.net/10722/154352-
dc.description.abstractThe influence of various drying time of a commercial silanes on the shear bond strength of a composite resin to silica-coated base and noble alloys was discussed. The drying time of MPS silane on tribochemically silica coated base and noble alloys did not show a significant difference in the bond strength of resin composite. The flow of work was optimized by reducing the drying time of MPS silane to 1 min for both base and noble alloys. It was observed that the bond strengths of resin composite to base alloys were higher than the bond strength of noble alloys at 2,3 and 5 min.en_US
dc.languageengen_US
dc.publisherElsevier Inc. The Journal's web site is located at http://www.elsevier.com/locate/dentalen_US
dc.relation.ispartofDental Materialsen_US
dc.subject.meshAnalysis Of Varianceen_US
dc.subject.meshCoated Materials, Biocompatibleen_US
dc.subject.meshComposite Resinsen_US
dc.subject.meshDental Alloysen_US
dc.subject.meshDental Bondingen_US
dc.subject.meshDental Stress Analysisen_US
dc.subject.meshDentin-Bonding Agentsen_US
dc.subject.meshDesiccationen_US
dc.subject.meshMaterials Testingen_US
dc.subject.meshMethacrylatesen_US
dc.subject.meshShear Strengthen_US
dc.subject.meshSilanesen_US
dc.subject.meshSilicon Dioxideen_US
dc.subject.meshStatistics, Nonparametricen_US
dc.subject.meshTime Factorsen_US
dc.titleEffect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloysen_US
dc.typeArticleen_US
dc.identifier.emailMatinlinna, JP:jpmat@hku.hken_US
dc.identifier.authorityMatinlinna, JP=rp00052en_US
dc.description.naturelink_to_subscribed_fulltexten_US
dc.identifier.doi10.1016/j.dental.2003.10.003en_US
dc.identifier.pmid15134947-
dc.identifier.scopuseid_2-s2.0-2342616708en_US
dc.relation.referenceshttp://www.scopus.com/mlt/select.url?eid=2-s2.0-2342616708&selection=ref&src=s&origin=recordpageen_US
dc.identifier.volume20en_US
dc.identifier.issue6en_US
dc.identifier.spage586en_US
dc.identifier.epage590en_US
dc.identifier.isiWOS:000222128100010-
dc.publisher.placeUnited Statesen_US
dc.identifier.scopusauthoridÖzcan, M=7102067681en_US
dc.identifier.scopusauthoridMatinlinna, JP=6602419428en_US
dc.identifier.scopusauthoridVallittu, PK=7006138548en_US
dc.identifier.scopusauthoridHuysmans, MC=35565929200en_US

Export via OAI-PMH Interface in XML Formats


OR


Export to Other Non-XML Formats